Gluing the seam
dongoss100 > albums > Neoprene drysuit gaskets
Album Info:
-
Uploaded by:
dongoss100In album: Neoprene drysuit gasketsIn Webshots channel: good times - Date uploaded: Oct 16, 2007
Seal Cement, contact cement for neoprene was used to glue the seam edges together. I have had good results by applying two coats of contact cement along the edges and immediately placing them together. If you let the glue dry too much it won't bond well. As your applying the glue it is helpful to wipe off any excess that get's on the glideskin or nylon sides of the neoprene as you go. Because the neoprene is so thin, it is very helpful to have good lighting so that you can see the glue being applied to the edge of the neoprene better.
Sample Email
Below is what we'll send to your friends to invite them - edit or remove the optional note.
Item #11 of 102
-
Follow Webshots on
Facebook >> and Twitter >>
Link to this picture
- Generate Codes for 100-pixel Image
- Generate Codes for 200-pixel Image
- Generate Codes for 425-pixel Image
- Generate Codes for 500-pixel Image
- Generate Codes for 600-pixel Image
Preview this size: 100 pixels
(New!) Tags
find similar pictures
picture dates
- Uploaded:
- Oct 16, 2007
- Taken on:
- Oct 9, 2007
Camera data
- Make:
- PENTAX Corporation
- Model:
- PENTAX Optio W30
- F stop:
- F/6.6
- Exposure:
- 1/50 sec.
- Focal length:
- 6.3 mm
- Flash:
- flash fired, auto mode (25)
- Metering mode:
- pattern (5)
- Dimensions:
- 2400x1800
No comments so far...
To be able to leave a comment please Log in or Sign up.