Album Info:
-
Uploaded by:
dongoss100In album: Neoprene drysuit gasketsIn Webshots channel: good times - Date uploaded: Oct 16, 2007
After the glue has set well, the heat tape can be applied. With an iron set to the HIGH setting, the tape can be applied. I found it helpful to practice on some scrap pieces of neoprene to get a feel for the time it takes to melt the glue on the tape so that it makes a secure bond. Care must be taken when applying the heat tape, so that the nylon on the neoprene isn't melted or damaged from the iron. The nylon surface of the neoprene is what gives it all of it's strength. Only use as much heat as needed to melt the glue. I start by heating down the center of the tape first, then go back and heat the edges.
Sample Email
Below is what we'll send to your friends to invite them - edit or remove the optional note.
Item #19 of 102
-
Follow Webshots on
Facebook >> and Twitter >>
Link to this picture
- Generate Codes for 100-pixel Image
- Generate Codes for 200-pixel Image
- Generate Codes for 425-pixel Image
- Generate Codes for 500-pixel Image
- Generate Codes for 600-pixel Image
Preview this size: 100 pixels
(New!) Tags
find similar pictures
picture dates
- Uploaded:
- Oct 16, 2007
- Taken on:
- Oct 10, 2007
Camera data
- Make:
- PENTAX Corporation
- Model:
- PENTAX Optio W30
- F stop:
- F/3.3
- Exposure:
- 1/50 sec.
- Focal length:
- 6.3 mm
- Flash:
- flash fired, auto mode (25)
- Metering mode:
- pattern (5)
- Dimensions:
- 2400x1800
No comments so far...
To be able to leave a comment please Log in or Sign up.